Track section for ceiling lighting single circuit 150cm Black

Rail System:
This rail is 150 cm long, white in color, and has a slot width of 15 mm. You can connect these rails to each other using additional accessories.

Installation:
The rail comes with 3 screws and the corresponding plugs. On one side, you can connect the rail with a cable, and this connection is neatly concealed by an end cap.

Rail lighting is a very easy and flexible system. It allows for adding unlimited lighting and is almost always adjustable. We distinguish between 1-phase and 3-phase rail lighting. For a 1-phase rail, a 1-phase rail spot is used, and for a 3-phase rail, a 3-phase rail spot is used.

In a 1-phase rail system (also known as a monophase system), all rail spots are operated on a single circuit. A circuit refers to the number of rail spots you can turn on with a single switch. To use a 1-phase rail system, your network can be either single-phase or three-phase. For example, if you have 3 x 380 V, you can use a 1-phase rail system, but you only use one circuit. Conversely, you can also use a 3-phase rail system in a single-phase network (for example, 1 x 230 V). In this case, you connect L1, L2, and L3 together.

In a 3-phase rail system, you have the option to turn on 3 circuits separately. This can be useful if you want to turn on some spots on the same rail with one switch and the others with one or two additional switches. For example, if you have a retail space and want to turn on basic lighting after closing hours, you can turn on a limited number of spots on the rail. However, you can also solve this problem by placing all the spots you want to continuously light on a 1-phase rail.