LED Driver DALI and Push-Dim 700-1050 mA – for LED Panel

This Lifud LED driver is intended for LED panels and delivers an adjustable output current of 700 to 1050 mA at an output voltage of 9 to 42V. You set the current with the DIP switch.

The driver is dimmable via DALI and via pushdim, so you can connect the lighting to a lighting control system or simply dim it with an ordinary push button.

Goes with

This driver is an option for the backlit LED panels of 34W in 60×60 cm, 62×62 cm and 30×120 cm. Those panels are supplied with a standard driver that is not dimmable; with this driver you make them dimmable. You will find the matching products below.

Which one should you choose?

You replace the panel's standard driver with this driver and set the correct output current with the DIP switch. You then dim the panel via DALI or with an ordinary push button (pushdim). Have the electrical connection carried out by a qualified electrician.

Frequently asked questions

Do I need this driver?

Only if you want to dim the panel. For normal use the panel works with the included driver.