LED strips, power supplies and accessories

LED strips • clear guide

From LED strip to a complete set.

On this page we explain which LED strip, power supply or driver, and accessories belong together. That way you order the correct components first and avoid incorrect voltage or a messy installation.

View all LED strips View power supplies & drivers

Step-by-step guide

Order in this sequence:

LED strip and length
Profile or cable trunking
Connection, dimmer or controller

The basics

Four choices, one complete set.

The product page contains the strips. Here you can see what else you need to mount them safely, neatly and so they are easy to operate.

01 • STRIP

White, COB, RGB or CCT

Choose the light color, the strip type and the correct width. Always check whether the strip is 12V or 24V.

02 • POWER

Power supply or driver

Use the same voltage as the strip. Calculate: watts per meter × number of meters × 1.2 for reserve.

03 • INSTALLATION

Profile or cable trunking

An aluminium profile cools and diffuses the light. A cable duct neatly conceals cables and connections.

04 • OPERATION

Dimmer or controller

For single-color you can optionally choose a dimmer. For RGB, RGBW or CCT you need a suitable controller.

Choose a driver with confidence

Which power supply or driver is suitable for which strip?

An LED strip operates on a constant low voltage. The driver must therefore have the same output voltage as the strip and provide sufficient power.

White / 1-color12V DC or 24V DC constant-voltage power supplyCan be combined with a 1-color dimmer.

COB white12V DC or 24V DC constant-voltage power supplyPay extra attention to the wattage per meter and the strip width.

RGB / RGBW12V or 24V DC power supply + RGB/RGBW-controllerUse a controller with the same number of channels as the strip.

CCT / tunable white12V or 24V DC power supply + CCT controllerUse the correct multi-core cable and connectors.

Important: 12V strip to 12V and 24V strip to 24V. A 48V rail power supply is not suitable for these LED strips. If in doubt: first check the voltage and the wattage on the product page.

Don't forget

Accessories for a neat installation.

The right strip is only the beginning. Also choose the accessories for hiding the cables, connecting the strip and finishing the ends.

Cooling & finishing

Aluminium profiles

For cooling, protection and a uniform light line. Check the internal dimension of the profile.

View page →Cables neatly out of the way

Cable duct / surface-mounted trunking

Tuck power cables and connections neatly away along the wall, cabinet or piece of furniture.

View page →Corners

Angle profiles

For installation in a corner or for indirect lighting. Choose a suitable profile and diffuser.

View page →Finish

End caps & mounting clips

Close the profile and secure it firmly with the appropriate clips or brackets.

View page →Connection

Connectors & cables

Pay attention to the strip width, the number of pins, and whether you need a straight connector or a right-angle connector.

View page →Operate

Dimmers & controllers

Choose single-color, RGB, RGBW or CCT based on the type of strip you selected.

View page →

Direct to the right page

Step 1LED-stripproducts Step 2Power supplies & drivers Step 3 & 4Profiles, cable ducts & accessories

Frequently Asked Questions

Which power supply do I need?

Use the same voltage as the strip. Multiply the wattage per meter by the length and add approximately 20% margin.

Do I always need an aluminum profile?

For a neat, even and durable installation, a profile is usually the best choice. Use a cable duct beside it to conceal the power cable and connections.

Can I use any dimmer or controller?

Choose a dimmer or controller that matches the strip voltage and strip type: single-color, RGB, RGBW or CCT.