LED Panel Surface Mount Frame 620x620x58 White

With this surface mounting frame of 62x62 cm you mount an LED panel directly against a solid ceiling of concrete, wood or plasterboard, without a suspended ceiling. You screw the frame to the ceiling and place the panel in it.

The frame is 58 mm high and is assembled with screws. Thanks to the extra height it fits both thin edge-lit panels and backlit panels of 28 to 30 mm thick, and there is room for the driver.

Which frame should I choose?

If you have a suspended ceiling, you don't need a frame: the panel simply sits in the grid. You use a surface mounting frame on a solid ceiling of concrete, wood or plasterboard if you don't want to cut into the ceiling. With a recessed frame, on the other hand, you build the panel flush into a plasterboard ceiling. With a surface mounting frame, pay attention to the thickness of your panel: thin edge-lit panels of 9 to 15 mm fit frames of 43 and 58 mm, backlit panels of 28 to 30 mm only a frame of 58 mm.

Technical specifications

Dimensions 620 x 620 x 58 mm, screw connection, colour white.