LED Waterproof Batten 23/28/34/40W Adjustable – 6,800 Lumen – Selectable CCT – 120 cm

This waterproof LED batten of 120 cm with an adjustable power of 23, 28, 34 or 40 watts delivers up to 6,800 lumens with an efficiency of up to 170 lumens per watt. It is suitable for car parks, warehouses, workshops, stables, technical rooms, basements, bicycle sheds and canopies, and easily replaces old fluorescent fittings.

The housing is dustproof and waterproof according to IP65 and impact-resistant according to IK08, with an opal plastic cover on an aluminium base. The end caps are held by screwless clamps, so you can quickly open the fitting during installation to connect the wiring.

Light colour and light

You set the light colour yourself with a switch to 3000K warm white, 4000K neutral white or 5000K daylight white, so one fitting suits different rooms. The default setting is 4000K. The luminous flux at full power is 6,400 lumens at 3000K, 6,800 lumens at 4000K and 6,800 lumens at 5000K. The light is spread widely over an angle of 120 degrees, so walls and corners are also well lit. The colour rendering is higher than CRI 80. You set the power of the fitting to 23W, 28W, 34W or 40W. This lets you match the light level to the room, for example lower in a storeroom and higher in a workshop. The adjustable power is not a dimming function.

Driver and connection

The driver is built in and is therefore simply included. You don't need to order a separate driver or power supply: you connect the fitting directly to the 230V mains. This version contains a Philips driver. This version is not dimmable. Thanks to the 5×2.5 mm² through-wiring you can easily link several fittings into a long light line, so you only need to run one supply cable to the start of the line. Have the electrical connection carried out by a qualified electrician.

Technical specifications

In short: power 23/28/34/40W, luminous flux up to 6,800 lumens, efficiency up to 170 lm/W, light colour adjustable 3000K/4000K/5000K, colour rendering CRI >80, light distribution 120°, length 1221 mm, IP65, IK08, driver built in (Philips), not dimmable, through-wiring 5×2.5 mm², 5-year warranty.

Frequently asked questions

Is the driver included?

Yes, the driver is built in. You connect the fitting directly to 230V; no separate fluorescent tubes or starters are needed.

How do I link several fittings together?

You connect the supply cable to the first fitting and continue from there to the next one via the through-wiring in the fitting. Have this done by an electrician and take the maximum load of the circuit into account.

You can download the datasheet on this product page.