Low voltage rail 48V 1 meter White

This SLIM track of 1 metres in white is the basis of the 48V magnetic track system. The track carries the 48 volt DC to all fittings, which you place in it with a click and then move freely. The SLIM track is an extra slim profile that you mount on the ceiling or suspend.

What do you need to make it complete?

The track itself gives no light and has no power supply of its own. For the SLIM track there is a dedicated SLIM internal driver of 100W that fits in the track, plus matching SLIM end caps and a SLIM cover profile for the sections of track where there is no fitting. You then choose the fittings. The driver is connected to 230V by your electrician and powers a maximum of 100 watts of fittings.

Dimensions: 27 × 28 × 1000 mm.

Technical specifications

In short: 48V system, IP20, colour white, 5-year warranty.

Frequently asked questions

Can I shorten the track?

The track is supplied in fixed lengths. Combine lengths of 1, 2 metres to get the desired total length.

Is a power supply included?

No. You order the power supply separately.

The maximum load per track run equals the power of the driver: 150 W with a 150 W driver and 100 W with the internal driver of the SLIM track. Keep a 10% margin, so in practice no more than approx. 135 W or approx. 90 W of fittings; add up the power of all fittings and use an extra driver if you need more.

All 48V track fittings of this system fit on this track, including the dimmable, CCT and DALI versions; the same fittings also fit the standard track, the slim SLIM track and the recessed track (TRACK IN).