Power supply 48V 150W White

This internal driver of 150W is the power supply for the 48V-track system. It converts the mains voltage of 230V to 48 volts DC and thus powers all fittings in the track. What is special is that the driver disappears inside the track: you slide it into the track profile, so you don't have to hide a separate power supply in the ceiling.

Connection and power

The driver has a connection cable of about 30 cm that your electrician connects to 230V. One driver powers a maximum of 150 watts of fittings. Add up the power of all fittings in the track; if the total is higher, install a second driver. This driver is intended for the standard 48V-track. Only insert or remove the driver when the power to the whole installation is switched off. The driver is not dimmable. Have the connection to the mains carried out by a qualified electrician.

Dimensions: 45 × 22 × 275 mm.

Technical specifications

In short: 48V system, IP20, colour white, 5-year warranty.

Frequently asked questions

How many fittings can I connect?

As many as you like, as long as the total power does not exceed 150 watts.

Do I also need a power connection?

No. The internal driver is itself the power supply of the track. The separate power connection is only needed if you use an external 48V driver.

The maximum load per track run equals the power of the driver: 150 W with a 150 W driver and 100 W with the internal driver of the SLIM track. Keep a 10% margin, so in practice no more than approx. 135 W or approx. 90 W of fittings; add up the power of all fittings and use an extra driver if you need more.