TL LED Fixture/ Triproof 36W 120cm 150L/W IP65 2 connection points for daisy-chaining

This linear fitting has a power of 36W and gives 4300 lumens. The housing is grey and made of polycarbonate. You use it for garages, storerooms, workshops, car parks and technical rooms. This linear fitting easily replaces an old-fashioned fluorescent fitting. You mount it directly on the ceiling or suspend it, and it gives full light immediately without flickering when switched on, even in cold rooms.

Installation and operation

This model is mounted on the ceiling or suspended.

Connection: what do you need?

The driver is built in: you connect the fitting directly to 230V and do not need a separate power supply or transformer. Have the connection to the mains carried out by a qualified electrician. The fitting has protection class II (double insulated), so an earth connection is not needed.

Light and technology

With this product you choose the light colour yourself: 4000K or 6000K. Warm white (around 3000K) gives an atmospheric, homely look; neutral white (4000K) is bright and natural; cool white (6000K) is fresh and businesslike. The beam angle is 120 degrees, a wide light distribution that lights the room evenly. The colour rendering is CRI 80. The fitting is not dimmable. With IP65 it is dustproof and waterproof and suitable for outdoors. The impact resistance is IK08. The lifetime is approximately 26,000 burning hours. The dimensions are 1200 × 64 × 60 mm.

Technical specifications

In short: power 36W, luminous flux 4300 lm, light colour 4000K, beam angle 120°, CRI 80, IP65, IK08, dimensions 1200 × 64 × 60 mm, lifetime 26,000 hours, driver built in, 230V, 3-year warranty.

Frequently asked questions

Do I need a separate driver or transformer?

No, the driver is built in. You connect the fitting directly to 230V.

Can I use this fitting outdoors or in the bathroom?

Yes, with IP65 it is suitable for that.

Can I dim the fitting?

No, this fitting is not dimmable.