Ceiling light E27 – round – black – with motion sensor – IP65 IK08 – Ø300×90 mm – without bulb

This downlight is a quality fitting from our range. The housing is black and made of plastic. You use this downlight for bathrooms, kitchens, hallways, offices and shops. You recess a downlight into the ceiling, so that only the sleek rim remains visible. For general lighting you place downlights in a regular grid; as a rule of thumb, keep about 1 to 1.5 metres between the spots at a normal ceiling height.

Installation and operation

This model is surface-mounted directly on the ceiling or wall, without having to cut a hole. The built-in motion sensor automatically switches the light on when someone approaches and off again after a set time. This saves energy and you don't have to look for a switch.

Connection: what do you need?

This fitting is supplied without a light source. It has an E27 fitting, into which you place a suitable E27 LED lamp yourself. This way you choose the light colour, power and beam angle yourself. You will find a suitable E27 LED lamp below under the matching products. You connect the fitting to 230V. Have the connection to the mains carried out by a qualified electrician. The fitting has protection class II (double insulated), so an earth connection is not needed.

Light and technology

With IP65 it is dustproof and waterproof and suitable for outdoors. The impact resistance is IK08. The lifetime is approximately 17,000 burning hours. The dimensions are 300 × 90 mm.

Technical specifications

In short: luminous flux n/a, IP65, IK08, dimensions 300 × 90 mm, lifetime 17,000 hours, light source not included, 2-year warranty.

Frequently asked questions

Is a lamp included?

No, you order the light source separately.

Can I use this fitting outdoors or in the bathroom?

Yes, with IP65 it is suitable for that.