LED surface spot round 10W 4000K IP44 UGR<19 Ø75×100 mm – black

What is it? LED surface-mounted spot of 10W in black. The beam angle is 40°.

What’s included? The LED is built in, so you do not need to buy a lamp. The driver belongs to the light (built in or supplied); you connect the light to the mains (230V). No extra power supply is needed.

Where can you use it? The protection rating is IP44: protected against splashing water. Suitable for indoor use and sheltered outdoor spots, such as under a canopy or porch roof, and in the bathroom outside the shower zone. Not suitable for places where it gets fully exposed to rain or a water jet. The impact resistance is IK06.

Light colour and light output. The light colour is 4000K, neutral white: bright but not cold, ideal for kitchens, offices, shops and workshops. The light output is approx. 950 lumen (95 lumen per watt). That is comparable to an old-fashioned incandescent bulb of 75W. The colour rendering is CRI >90, so colours look very natural.

Installation. The dimensions are 75 × 100 mm. The light is protection class II (double insulated); no earth wire is needed. Have the light connected by a qualified electrician.

How many do you need? For a room, count on roughly 100 to 150 lumen per m² (living spaces) or 300 to 500 lumen per m² (kitchen, workspace).

Warranty and service. You get 5 years warranty. The stated lifetime is 50,000 hours. Do you have a question about this product? Email us at info@dimay.com.