LED Panel Round Ø170mm 18watt White Incl.Driver IP65

This downlight has a power of 18W and gives 1600 lumens. The housing is white and made of polycarbonate and plastic. You use this downlight for bathrooms, kitchens, hallways, offices and shops. You recess a downlight into the ceiling, so that only the sleek rim remains visible. For general lighting you place downlights in a regular grid; as a rule of thumb, keep about 1 to 1.5 metres between the spots at a normal ceiling height.

Installation and operation

This model is recessed, in a plasterboard ceiling or suspended ceiling. The cut-out size is 145 mm.

Connection: what do you need?

The driver is built in: you connect the fitting directly to 230V and do not need a separate power supply or transformer. Have the connection to the mains carried out by a qualified electrician. The fitting has protection class II (double insulated), so an earth connection is not needed.

Light and technology

The light colour is 6000K warm white, an atmospheric, warm light colour that looks calm and homely. The beam angle is 110 degrees, a wide light distribution that lights the room evenly. The colour rendering is CRI 80. The fitting is not dimmable. With IP54 it is dustproof and splash-proof, suitable for bathrooms, kitchens and covered outdoor areas. The impact resistance is IK06. The lifetime is approximately 17,000 burning hours. The dimensions are 170 × 34 mm.

Technical specifications

In short: power 18W, luminous flux 1600 lm, light colour 6000K, beam angle 110°, CRI 80, IP54, IK06, cut-out 145 mm, dimensions 170 × 34 mm, lifetime 17,000 hours, driver built in, 230V, 2-year warranty.

Frequently asked questions

Do I need a separate driver or transformer?

No, the driver is built in. You connect the fitting directly to 230V.

What size hole should I cut?

The cut-out size is 145 mm.

Can I use this fitting outdoors or in the bathroom?

Yes, with IP54 it is suitable for that.