LED Wall Light with Motion Sensor 20W K4000 1800 lm IP54 – Rectangular

This facade lighting has a power of 20W and gives 1800 lumens. The housing is black and made of plastic. You use this facade lighting for facades, entrances, terraces and garden walls. Facade lighting atmospherically lights up your house or building in the evening and at the same time provides safety around the entrance. Mount the lamps symmetrically next to the door or in a regular pattern along the facade for a calm look.

Installation and operation

This model is surface-mounted directly on the ceiling or wall, without having to cut a hole. The built-in motion sensor automatically switches the light on when someone approaches and off again after a set time. This saves energy and you don't have to look for a switch.

Connection: what do you need?

The driver is built in: you connect the fitting directly to 230V and do not need a separate power supply or transformer. Have the connection to the mains carried out by a qualified electrician. The fitting has protection class II (double insulated), so an earth connection is not needed.

Light and technology

The light colour is 4000K neutral white, a bright and natural light in which colours come into their own. The beam angle is 180 degrees, a wide light distribution that lights the room evenly. The colour rendering is CRI 80. The fitting is not dimmable. With IP54 it is dustproof and splash-proof, suitable for bathrooms, kitchens and covered outdoor areas. The lifetime is approximately 17,000 burning hours. The dimensions are 300 × 150 × 86 mm.

Technical specifications

In short: power 20W, luminous flux 1800 lm, light colour 4000K, beam angle 180°, CRI 80, IP54, dimensions 300 × 150 × 86 mm, lifetime 17,000 hours, driver built in, 230V, 2-year warranty.

Frequently asked questions

Do I need a separate driver or transformer?

No, the driver is built in. You connect the fitting directly to 230V.

Can I use this fitting outdoors or in the bathroom?

Yes, with IP54 it is suitable for that.

Can I dim the fitting?

No, this fitting is not dimmable.