LED Construction Lamp 30W

This floodlight has a power of 30W and gives 2650 to 2750 lumens. The housing is white and made of aluminium, plastic and glass. You use this floodlight for facades, driveways, gardens, car parks and business premises. You aim a floodlight with the bracket exactly at the area you want to light. Mount it slightly above eye level and aim it downwards at an angle, so that neighbours and passers-by are not dazzled.

Installation and operation

This model is surface-mounted directly on the ceiling or wall, without having to cut a hole. The built-in motion sensor automatically switches the light on when someone approaches and off again after a set time. This saves energy and you don't have to look for a switch.

Connection: what do you need?

The driver is built in: you connect the fitting directly to 230V and do not need a separate power supply or transformer. Have the connection to the mains carried out by a qualified electrician. The fitting has protection class I and must be connected to an earthed connection.

Light and technology

The light colour is 4000K neutral white, a bright and natural light in which colours come into their own. The beam angle is 100 degrees, a wide light distribution that lights the room evenly. The colour rendering is CRI 80. The fitting is not dimmable. With IP44 it is splash-proof, suitable for bathrooms (outside the shower zone) and covered outdoor areas. The lifetime is approximately 17,000 burning hours. The dimensions are 188 × 160 × 28 mm.

Technical specifications

In short: power 30W, luminous flux 2650/2750 lm, light colour 4000K, beam angle 100°, CRI 80, IP44, dimensions 188 × 160 × 28 mm, lifetime 17,000 hours, driver built in, 230V, 2-year warranty.

Frequently asked questions

Do I need a separate driver or transformer?

No, the driver is built in. You connect the fitting directly to 230V.

Can I use this fitting outdoors or in the bathroom?

Yes, with IP44 it is suitable for that.

Can I dim the fitting?

No, this fitting is not dimmable.