LED Driver Box 1200W – DALI / DMX / 0-10V – for LED Stadium Light

This driver box with an Inventronic LED driver of 1200W is intended for the LED stadium lighting that is supplied without driver. The box works on an input voltage of 180-528V.

The lamp and the driver box are both supplied with cables, so the connection between the lamp and the driver box is included. A mains cable (the connection to the power grid) is not included: your installer connects a suitable cable to the driver box.

You set the power continuously from 0 to 1200W with the rotary dimmer, or you control the lighting via DALI, DMX or 0-10V. Because the driver box is mounted separately from the lamp, you place it in an easily accessible spot on or near the mast. That makes maintenance easier.

Goes with

This driver box fits the LED stadium lighting of 1200/1500W, in the versions with 20 and 30 degrees, when you use the lamp at 1200W. Those lamps are supplied without driver; you need one driver box per lamp. You will find the matching products below.

Which one should you choose?

Choose this box if you want to integrate the lighting into a lighting control system via DALI, DMX or 0-10V. If you want to use the lamp at the full power of 1500W, choose the 1500W driver box. Have the electrical connection carried out by a qualified electrician.

Frequently asked questions

How many driver boxes do I need?

One driver box per stadium lamp.