LED Street Light 0-40W Adjustable – 180 lm/W – 4000K – Excl. Driver

This LED street light with a continuously adjustable power of up to 40W has a very high efficiency of 180 lumens per watt. You use it to light streets, residential areas, cycle paths, car parks and business parks. Thanks to the high efficiency you get a lot of light from little power, which makes a big difference to the energy bill for a whole street or neighbourhood.

Please note: supplied without driver

This street light is supplied without driver. The light module runs on 48V, so you need one matching external driver. Choose the LED driver 40W 1-10V with AstroDIM if you want simple dimming or automatic dimming at night, or the LED driver 40W DALI-2 with D4i and AstroDIM if you integrate the lighting into a DALI lighting control system. The DALI-2 driver also has a 24V auxiliary supply, for example for a sensor. You will find both drivers below under the matching products; order one per lamp.

Light colour and light distribution

The light colour is 4000K neutral white, a bright and pleasant working light in which colours look natural, the most popular light colour for workspaces. The asymmetric Type III optic distributes the light widely over the road and pavement, so you can also light wider roads and junctions evenly from one side. The colour rendering is higher than CRI 70.

Design and mounting

The fitting has a built-in safety switch that cuts the voltage as soon as you open the fitting, and surge protection of 10 kV against mains peaks, for example from a nearby lightning strike. The fitting fits a pole with a diameter of 60 mm. Have the electrical connection carried out by a qualified electrician.

Technical specifications

In short: power continuously adjustable up to 40W, efficiency 180 lm/W, light colour 4000K, colour rendering CRI >70, Type III optic, safety switch, surge protection 10 kV, pole diameter 60 mm, supplied without driver (module 48V, order driver separately) and 5-year warranty.

Frequently asked questions

Is the driver included?

No. This version is supplied without driver. You order one matching driver per lamp separately: a 1-10V driver or a DALI-2 driver. You will find both under the matching products.

What is AstroDIM?

AstroDIM is a function in the driver that automatically sets the lamp to a lower level at night, based on the burning time. You don't need a control cable or timer for this.

You can download the datasheet on this product page.