LED UFO High Bay 100/120/150W Adjustable – 22,500 Lumen – 4000K / 5000K – 120° – Dimmable 1-10V

This round LED high bay with an adjustable power of 100, 120 or 150 watts delivers up to 22,500 lumens with an efficiency of 150 lumens per watt. With it you light warehouses, production halls, workshops, distribution centres, sports halls, stables and other high spaces powerfully and evenly.

You use it to replace old metal halide or sodium fittings and cut power consumption considerably, while the light is instantly at full strength, without warm-up time and without flickering when switched on.

Light colour and light distribution

With this product you choose the light colour yourself: 4000K neutral white or 5000K daylight white. 4000K is a bright and pleasant working light in which colours look natural, the most popular light colour for workspaces; 5000K is a fresh and bright light that increases contrast and works well where accurate vision and alertness are important. The beam angle is 120 degrees. As a guideline, this beam suits a mounting height of about 4 to 7 metres. A wide beam gives an even distribution over the floor and walls and is ideal for open halls with a lower ceiling, so you avoid dark spots even with fewer lamps. The colour rendering is higher than CRI 80, so colours, labels and markings remain clearly recognisable. You set the power of the lamp to 100W, 120W or 150W. This lets you match the light output to the height of the hall and the desired light level, and equip different rooms with one type of lamp. Please note: this is a fixed setting and not a dimming function.

Housing and installation

The housing is made of black die-cast aluminium with cooling fins that dissipate the heat of the LEDs well, which benefits the lifetime. The lamp is dustproof and waterproof according to IP65 and impact-resistant according to IK08, and works at ambient temperatures from -40 to +45 °C. This also makes it suitable for dusty production areas, unheated sheds and cold stores. The lamp has a short connection cable of 0.3 metres, intended for connection in a junction box or to a plug close to the lamp. You hang the high bay from a hook, chain or steel cable above the work area. Have the electrical connection carried out by a qualified electrician.

Driver and control

The driver is built in and is therefore simply included. You don't need to order a separate driver or power supply: you connect the fitting directly to the 230V mains. This version contains a branded driver. The driver is dimmable via 1-10V. With a 1-10V dimmer or a simple lighting control system you set the brightness, for example lower during quiet hours. If you don't use a dimmer, the lamp simply runs at full power.

Technical specifications

In short: power 100/120/150W, luminous flux up to 22,500 lumens, efficiency 150 lm/W, light colour 4000K / 5000K, colour rendering CRI >80, beam angle 120°, protection rating IP65, impact resistance IK08, driver built in, dimmable 1-10V, connection cable 0.3 m, 5-year warranty.

Frequently asked questions

Is the driver included?

Yes. The driver is built into the lamp. You connect the high bay directly to 230V and need no additional power supply.

Which beam angle suits my hall?

As a guideline, choose 120 degrees for a mounting height of about 4 to 7 metres, 90 degrees for about 7 to 12 metres and 60 degrees for about 12 to 15 metres. If in doubt, send us the dimensions of the room and we will gladly make a lighting calculation.

Can I adjust the power later?

Yes. You set the power on the lamp itself, so you can change the setting later if the use of the room changes.

You can download the datasheet on this product page.

View all LED High Bays 100W | View all LED High Bays 150W