LED UFO High Bay 150W – 22,500 Lumen – 5000K – 90° – built-in driver

This round LED high bay of 150W delivers 22,500 lumens with an efficiency of 150 lumens per watt. With it you light warehouses, production halls, workshops, distribution centres, sports halls, stables and other high spaces powerfully and evenly.

You use it to replace old metal halide or sodium fittings and cut power consumption considerably, while the light is instantly at full strength, without warm-up time and without flickering when switched on.

Light colour and light distribution

The light colour is 5000K daylight white, a fresh and bright light that increases contrast and works well where accurate vision and alertness are important. The beam angle is 90 degrees. As a guideline, this beam suits a mounting height of about 7 to 12 metres. A beam of 90 degrees brings the light down in a more concentrated way, so that enough light still reaches the work floor from greater heights. That is the right choice for higher halls and for rooms with racking. The colour rendering is higher than CRI 80, so colours, labels and markings remain clearly recognisable.

Housing and installation

The aluminium housing dissipates heat well, which benefits the lifetime of the LEDs. The lamp is dustproof and splash-proof according to IP65. The lamp has a short connection cable of 0.3 metres, intended for connection in a junction box or to a plug close to the lamp. You hang the high bay from a hook, chain or steel cable above the work area. Have the electrical connection carried out by a qualified electrician.

Driver and control

The driver is built in and is therefore simply included. You don't need to order a separate driver or power supply: you connect the fitting directly to the 230V mains. This version contains a branded driver. This version is not dimmable and you switch it with an ordinary switch, a time switch or an external motion detector.

Technical specifications

In short: power 150W, luminous flux 22,500 lumens, efficiency 150 lm/W, light colour 5000K, colour rendering CRI >80, beam angle 90°, protection rating IP65, driver built in, not dimmable, connection cable 0.3 m, 5-year warranty.

Frequently asked questions

Is the driver included?

Yes. The driver is built into the lamp. You connect the high bay directly to 230V and need no additional power supply.

Which beam angle suits my hall?

As a guideline, choose 120 degrees for a mounting height of about 4 to 7 metres, 90 degrees for about 7 to 12 metres and 60 degrees for about 12 to 15 metres. If in doubt, send us the dimensions of the room and we will gladly make a lighting calculation.

How many lamps do I need?

That depends on the floor area, the height and the desired light level. Send us the dimensions of the room and we will calculate it for you.

You can download the datasheet on this product page.

View all LED High Bays 150W