3-Phase LED Rail Spot 20W CCT 85 lm/W White

What is it? Track spot for 3-phase track of 20W in white. You click the spot onto a 3-phase (3-circuit) track and can slide and aim it along the track. The beam angle is 20-45°.

What’s included? The LED is built in, so you do not need to buy a lamp. The driver belongs to the light (built in or supplied); you connect the light to the mains (230V). No extra power supply is needed.

What else do you need? You also need a 3-phase track with feed-in (and connectors if needed) from our 3-Phase Tracks & Accessories category; note: this spot only fits a 3-phase (3-circuit) track. Not sure what fits? Email us at info@dimay.com.

Where can you use it? The protection rating is IP20. This means: for dry indoor spaces only, such as living room, bedroom, hallway, office or shop. Do not use it in the shower or directly above a bath or shower, not outdoors and not in damp spaces such as a stable or an unheated barn.

Light colour and light output. The light colour is adjustable: warm white, neutral white or cool white. Warm white suits living rooms and bedrooms, neutral white kitchens, offices and shops, cool white garages and workshops. The light output is approx. 1,700 lumen (85 lumen per watt). That is comparable to an old-fashioned incandescent bulb of 100W. The colour rendering is CRI 80.

Installation. The dimensions are 84 × 136 × 185 mm. The light is protection class I and must be connected with an earth. Have the light connected by a qualified electrician.

How many do you need? In a shop, count on roughly one spot per 1 to 1.5 metres of track, depending on the lamp you choose.

Warranty and service. You get 2 years warranty. The stated lifetime is 17,000 hours. Do you have a question about this product? Email us at info@dimay.com.