Flush-mounted rail 48V 2 meters Black

This recessed track of 2 metres in black is the basis of the 48V magnetic track system. The track carries the 48 volt DC to all fittings, which you place in it with a click and then move freely. You build this version into the ceiling, so that the track lies flush in the ceiling and only the light line is visible. The recess opening is 35 mm wide.

What do you need to make it complete?

For recessing, use the recessed kit for TRACK IN. You also need a power supply, for example the internal driver of 150W, and of course the fittings. Have the connection to the mains carried out by a qualified electrician.

Dimensions: 41 × 51 × 2000 mm.

Technical specifications

In short: 48V system, IP20, colour black, 5-year warranty.

Frequently asked questions

Can I shorten the track?

The track is supplied in fixed lengths. Combine lengths of 1, 2 metres to get the desired total length.

Is a power supply included?

No. You order the power supply separately.

The maximum load per track run equals the power of the driver: 150 W with a 150 W driver and 100 W with the internal driver of the SLIM track. Keep a 10% margin, so in practice no more than approx. 135 W or approx. 90 W of fittings; add up the power of all fittings and use an extra driver if you need more.

All 48V track fittings of this system fit on this track, including the dimmable, CCT and DALI versions; the same fittings also fit the standard track, the slim SLIM track and the recessed track (TRACK IN).