Track rail 48V 3 meters Black

This 48V-track of 3 metres in black is the basis of the 48V magnetic track system. The track carries the 48 volt DC to all fittings, which you place in it with a click and then move freely. You mount the track on the ceiling, suspend it with the pendant kit or recess it with the recessed kit.

What do you need to make it complete?

The track itself gives no light and has no power supply of its own. You also need: a power supply (the easiest is the internal driver of 150W that slides into the track, or a power connection for an external 48V driver), two end caps and of course the fittings. If you link several tracks, use a mechanical coupling plate and an electrical straight connector per joint; for a corner an L-corner connector with flexible connector. You suspend it with the pendant kit of 2 metres, recess it with the recessed kit, and finish track sections without fittings with the cover profile.

Dimensions: 52 × 26 × 3000 mm.

Technical specifications

In short: 48V system, IP20, colour black, 5-year warranty.

Frequently asked questions

Can I shorten the track?

The track is supplied in fixed lengths. Combine lengths of 1, 2 or 3 metres to get the desired total length.

Is a power supply included?

No. You order the power supply separately.

The maximum load per track run equals the power of the driver: 150 W with a 150 W driver and 100 W with the internal driver of the SLIM track. Keep a 10% margin, so in practice no more than approx. 135 W or approx. 90 W of fittings; add up the power of all fittings and use an extra driver if you need more.

All 48V track fittings of this system fit on this track, including the dimmable, CCT and DALI versions; the same fittings also fit the standard track, the slim SLIM track and the recessed track (TRACK IN).