LED Panel 62x62 cm | 40W | CCT Dimmable | 3000K-6000K | CRI90 | Remote Control

This 62x62 cm LED panel gives you full control over the light. With the supplied remote control you dim the panel steplessly and set the light colour between 3000K warm white and 6000K cool white. With 40W the panel delivers 3600 lumens, and thanks to a colour rendering of CRI 94 colours, skin tones and materials look natural and real.

This lets you match the light to the time of day. Use bright, cool white for focused work and a soft, warm, dimmed light for a meeting, a treatment or a quiet moment. The panel is only 9 mm thick and gives an even light without visible light points. It is very suitable for offices, meeting rooms, practices, classrooms, shops and homes with a suspended ceiling.

Easy on the eyes

The panel has been tested to the European ecodesign standards and scores excellently on flicker. The flicker value is 0.1 and the stroboscopic value is also 0.1, far below the legal limits. The light is therefore calm on the eyes, even during long hours of work under the panel. The colour consistency of 4 MacAdam steps ensures that several panels next to each other give exactly the same light colour.

Mounting options and accessories

The panel is supplied with driver and remote control and fits directly into a suspended ceiling with a 625 mm grid. You need nothing extra for that. If you do not have a suspended ceiling, choose one of the mounting options below, depending on your ceiling. These options are available separately and you will find them below this product description.

With a 62x62 cm surface-mounting frame you mount the panel directly against a solid ceiling of concrete, wood or plasterboard. You screw the frame to the ceiling and place the panel in it, creating a sleek surface-mounted light. There are two versions, both suitable for this 9 mm panel: the 43 mm high frame is assembled with plastic clips and the 58 mm high frame with screws.

With the 62x62 cm recessed frame you build the panel into a plasterboard ceiling. You make an opening in the ceiling, fit the frame and lay the panel in it, so that it sits neatly flush with the ceiling.

With the Y suspension kit you hang the panel from steel cables, for example above a desk or meeting table or in a room with a high ceiling. This way the panel hangs at exactly the height where you need the light.

You use the spring clips (set of 4) to clamp the panel into a ceiling cut-out without a frame.

A separate remote control is handy as an extra control or as a replacement. A remote control is already included with the panel.

You connect the driver to 230V mains voltage. Have the electrical connection carried out by a qualified electrician.

Technical properties

The panel measures 620 x 620 x 9 mm and has a power of 40W with a luminous flux of 3600 lumens at a beam angle of 120°. The colour temperature is steplessly adjustable from 3000K to 6000K and the panel is dimmable with the supplied remote control. The colour rendering is CRI 94 and the energy label is E. The panel has protection rating IP20 and is intended for dry indoor spaces. The standby consumption is 0.9W, the lumen maintenance factor 0.96, and the panel is registered in the European EPREL database under number 949009.

Frequently asked questions

Is the remote control included?

Yes, the remote control and the driver are included. An extra or replacement remote control is available separately.

Can I also control the panel with my smartphone?

This version works with the remote control. If you want to control the panel via an app, choose the Wi-Fi version of this panel. It has the same light quality and can be controlled via the Smart Life app.

Does this panel fit my suspended ceiling?

The panel is 620 x 620 mm and fits ceilings with a 625 mm grid. For a ceiling with a 600 mm grid you need a 595 x 595 mm panel.