België 
Denmark 
Deutsch 
Español 
Finland 
Français 
Nederlands 
Sweden 
Strip-to-strip connector 10 mm for COB strips. Install without soldering.
-
3 days -
2 years -
14 x 12 x 5 mm
- Categories:
- LED Strip Accessories
With this click connector you couple two pieces of strip directly together, without soldering. This version is suitable for COB strips 10 mm wide.
What to look out for?
Always choose a connector with the same width and type as your strip: a COB strip has different connectors than an SMD strip, and an RGB strip has more contacts than a single-colour strip. Cut the strip at a cutting point, slide it into the connector until the contacts sit properly on the copper pads, and close the clip. Mind the plus and minus. The connector works on low voltage (12V or 24V) and belongs between the LED power supply and the strip, never on 230V.
Frequently asked questions
Do I need to solder?
No, this is a click connector that you install without soldering.
| Dimay Sku | DM98621 |
|---|---|
| Light Color | K3000 |
| Dimensions | 14 x 12 x 5 mm |
| Delivery Time | 3 days |
| Voltage (V) | 12V |
| Light Source Included | No |
| Ambient Temperature (°C) | -20/+40 |
| Impact Resistance Rating (IK) | AFTER |
| Operating Temperature (°C) | -20/+40 |
| Warranty | 2 years |
-
S-S cable connector 10 mm COB for COB LED strip€2.50 €2.07 -
S-S connector 10 mm COB for COB LED strip€1.23 €1.02 -
S-S cable connector 10 mm for LED strip€0.94 €0.78 -
S-S connector 10 mm for LED strip€0.65 €0.54 -
S-D connector for LED strip – 10 mm€0.58 €0.48
